8.2.3. CAPSTAN TILT ADJUSTMENT
Purpose:
To adjust the tilt of the Capstan Shaft properly.
Symptom of Misadjustment:
If the tilt of the Capstan Shaft is poorly adjusted, the tape might be
damaged.
Equipment Required:
Capstan Tilt Adjustment Tool (LSVQ0020)
1. Set the Capstan Tilt Adjustment Tool between Capstan Unit and
Chassis.
Fig. T2-1
2. Tighten the Capstan Adjust Screw so that the plate of Capstan
Unit just touches to the Capstan Tilt Adjustment Tool.
Fig. T2-2
58
To Next Page
Loading...
