EasyManua.ls Logo

Panasonic NV-MX2 - Recording Video and Voice; Recording MPEG4 Moving Pictures; Recording Voice Data

Panasonic NV-MX2
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
2
3
1
TAPE
CARD
PICTURE
VOICE
MPEG4
CARD MODE
R:0h20m
MPEG4
1
2
2
3
PUSH
MENU
W.B/SHUTTER/IRIS/
VOL/JOG
1
1
3
4
2
3
1
TAPE
CARD
PICTURE
VOICE
MPEG4
CARD MODE
VOICE
R:0h20m
ª
Recording a Moving Picture (MPEG4)
You can record moving pictures for e-mailing on a card. The recorded data
can be also played back on Windows Media Player.
Recording from the Movie Camera Lens (Camera Mode)
1
Slide the [TAPE/CARD] Selector to [CARD].
2
Slide the [PICTURE/MPEG4/VOICE] Selector to [MPEG4].
3
Press the Recording Start/Stop Button.
It takes 2 to 3 seconds to start recording.
During recording the [ ] indication appears and is lit in red.
When Remaining Time Indication becomes [R:0h00m], [ ]
indication flashes in red. Recording may not be started.
The shutter speed is adjusted within the range of 1/25 to 1/500 while
recording moving pictures (MPEG4)
.
The picture size of the moving picture (MPEG4) is set to be [176k144].
The following functions are disabled:
Digital zooming
(
l
20)
Cinema function
(
l
21)
Digital functions
(
l
25)
Title functions
(
l
42)
Fade In/Out Function
For other notes concerning this item, see page 50.
Recording from a Cassette (VCR Mode)
1
11
1
Slide the [TAPE/CARD] Selector to [CARD].
2
22
2
Slide the [PICTURE/MPEG4/VOICE] Selector to [MPEG4].
3
33
3
Start playback and press the Recording Start/Stop Button at
the desired scene.
Recording from an other equipment
1
Set [CAMERA FUNCTIONS] or [VCR FUNCTIONS] >>
[CARD SETUP] >> [PICTURE QUALITY] >> a desired image
quality.
2
Slide the [TAPE/CARD] Selector to [CARD].
3
Slide the [PICTURE/MPEG4/VOICE] Selector to [MPEG4].
4
Input the image from other equipment then press the
Recording Start/Stop Button at the desired scene.
ª
Recording Voice (Voice Recording Function)
You can record voice data on a card.
1
Slide the [TAPE/CARD] Selector to [CARD].
2
Slide the [PICTURE/MPEG4/VOICE] Selector to [VOICE].
3
Press the Recording Start/Stop Button.
Voice from built-in microphone is recorded.
It takes 2 to 3 seconds to start recording.
The recorded file is automatically locked (to prevent accidental
erasure).
Voice from external microphone connected to the microphone socket
can also be recorded.
During recording, the [ ] indication appears and is lit in red.
If a card is not inserted, the indication flashes in red.
When Remaining Time Indication becomes [R:0h00m], [ ]
indication flashes in red. Recording may not be started.
For other notes concerning this item, see page 50.
MPEG
4
MPEG
4
VOICE
VOICE
B.book37ページ2001年8月27日 月曜日 午前10時14

Table of Contents

Related product manuals