Panasonic NV-MX2 - Selecting and Searching Card Files; Selecting and Playing Files on Card; Using File Search Mode

39
1
TAPE
CARD
PICTURE
VOICE
MPEG4
CARD MODE
1
3
5
4
PICTURE
No.25 IMGA0012.JPG
2
640
640
640
640
640
640
PUSH
W.B/SHUTTER/IRIS/
VOL/JOG
2,4
MULTI/P-IN-P
3,4
MENU
1
1,2
To Select a Desired File and Play It Back
1
Slide the [PICTURE/MPEG4/VOICE] Selector to desired type
of data.
2
Press the [MULTI] Button.
≥The files recorded on the Card are displayed in Multi-Picture Mode.
1
3
Turn the [PUSH] Dial and select a desired file.
≥The selected files is marked with a frame.
≥When 7 or more files have been recorded, turn the [PUSH] Dial to
display the next file. The Operation Lever (towards [6] or [5])can
be used instead of the [PUSH] Dial.
4
Press either the [PUSH] Dial or the [MULTI] Button.
≥The selected file is shown on the entire screen.
2
Picture Size (When [PICTURE] is selected at Step 1 )
3
File Number
4
File Name (When [PICTURE] or [MPEG4] is selected at Step 1 )
Using File Search Mode
1
11
1
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[FILE SEARCH] >> [YES].
2
22
2
Turn the [PUSH] Dial and select the desired file number, and
press the [PUSH] Dial.
5
≥For other notes concerning this item, see page 51.
B.book39ページ２００１年８月２７日 月曜日 午前１０時１４分