27
General convenient functions
Auto-Start
When inserting a cassette the VCR will automatically
switch on.
Automatic stop function
To protect the video heads the device will automatically quit
the functions search backwards/forwards, quick search, still
playback and slow playback after 5-10 minutes. Interference
and motor noise are not a malfunction.
Automatic rewinding
When a cassette is played to the end, the VCR will
automatically rewind it to the beginning of the tape.
D
This function is not available during programmed
recording sessions.
Fast winding forward or backwards
!
In stop mode press or .
Press STOP to end winding.
Quick search for a beginning of a recording
While playing back or in stop-mode.
!
INDEX tape winds forward / INDEX tape rewinds.
Every time you press the button (max. 20 times) the
VCR will find the start of the next recording.
Playback will start automatically.
!
Press STOP to exit the Search function.
Search forward or backwards
!
While playing back press or ,
the search begins.
!
When pressing the button twice (JET SEARCH) the search
speed increases.
!
When holding the button down the search will run for the
duration of the button being held.
!
Press PLAY to end search.
Still playback
!
Press PAUSE/SLOW during playback.
!
To exit still playback press PAUSE/SLOW again or PLAY .
Slow playback
!
During playback press PAUSE/SLOW for longer than 2
seconds.
!
To exit slow motion playback press PLAY .
JET REW
For fast rewinding to the beginning of the tape.
On a E180 cassette approx. 43 seconds.
D
Tape counter and tape remain display are unavailable
during this function.
D
This function is not available in some cases
(e.g. at the beginning or end of the tape).
To Next Page
Loading...
