Panasonic NV-VP21 - DVD Playback Navigation; Chapter Review and Position Memory; Playback Modes and Track Selection

DVD-Video
DVD-Video
WMA
JPEG
CD
MP3
RAM
WMA
JPEG
MP3
CDVideo CD
Video CD
31
Video CD
RAM
DVD-Video
Video CD
WMA
JPEG
CD
MP3
RAM
DVD-A
DVD-A
DVD-A
DVD-Video
DVD-Video
DVD-A
Playback functions
Chapter review
This function lets you browse back through the chapters of a
DVD-V by playing the first couple of seconds of every chapter.
!
Press STOP during playback.
!
Press PLAY .
A message appears: Press PLAY to Chapter Review
!
Press PLAY again.
The first couple of seconds of every chapter are played back.
Normal playback is resumed at the point where you stopped it.
D
Do not press PLAY if you do not wish to browse back through the
chapters. After a couple of seconds, normal playback will be automatically
resumed at the point where it was stopped.
POSITION MEMORY
Use the Position Memory function to resume disc playback at a
set position.
You can tag and directly access up to 5 discs.
The position tag is retained when you change discs or when the
unit goes into stand-by mode.
!
Press POSITION MEMORY during playback.
A message appears: Position memorized.
You can now change discs or go into stand-by mode.
!
Press PLAY to play back the disc again. Playback is
resumed at the stored position and the position tag is cleared.
D
Some discs do not fully support all of this functions.
Random Playback
All chapters/tracks are played
once each in a random order.
!
Press PLAY MODE while the disc is stopped.
The Program Play screen is displayed.
!
Press PLAY MODE again.
The Random Playback screen is displayed.
!
Press PLAY to start random playback.
!
To deactivate the function, stop the disc and press PLAY
MODE.
D
DVD-V, MP3, WMA, JPEG: Press or the numeric keys of the
remote control unit to select or specify the track/group to be played
in a random order.
Single frame mode
In pause mode, press remote control buttons or .
Every push of one of these buttons takes the film a single frame
forwards or backwards. Keeping one of these buttons pressed
continuously displays the next single frame in the chosen
direction. You can also press PAUSE/SLOW to move the film
forward a single frame at a time.
D
VCDs do not support a backward motion by single frames.
Playback of a particular
track or title
Type in a number using the RC unit's numeric key pad.
For example, to select title 23:
DVD/RAM/VCD/CD : Press
+ + .
MP3/WMA/JPEG : Press
+ +
ENTER
.
The unit automatically starts playing the selected track.
D
Certain discs may not provide this function at all, or only if the appliance
is in stop mode.