Panasonic NV-VX55A - Selecting the Recording Speed; Selecting the Correct Tape Length

1 4,7 ee va aaa, MAIN MENU
> PLAY z <
@ —— = sree = sP
PAUSE STOP TAPES »30
AS] 3 TITLESET © POFF
APS > OFF
D.ZOOM pa2x
MSENSOR OFF
SHUTTER REC OFF
SELF SHOOT ®NOR.
ITEM SET
PRESS MENU TO EXIT
MAIN MENU
~SPEEP, psp
3 TAPEGR= 30 45
“WIESET = POFF
APS OFF
0.Z00M paax
M.SENSOR OFF
SHUTTER REC »OFF
SELF SHOOT NOR,
PRESS MENU TO EXIT
Selecting the Recording Speed
The desired recording speed can be selected with
[SPEED] on the Menu.
Press the [MENU] Button.
©The Main Menu [MAIN MENU} appears.
2 Press the [ITEM] Button repeatedly until
select [SPEED] @ flashes.
3 Press the [SET] Button to select the
desired recording speed (SP or LP).
@The selected recording speed is marked with the
[>] mark,
@(SP] means Standard Play. [LP] means Long Play.
Selecting the Correct Tape Length
To ensure that the displayed remaining tape time during
recording and playback is correct, you need to set the
tape length that matches that of the inserted cassette.
The initial setting is (G8 30).
Press the [MENU] Button.
The Main Menu [MAIN MENU] appears.
5 press the [ITEM] Button repeatedly until
[TAPE&=] @ flashes.
6 Press the [SET] Button to select the
correct tape length.
©The selected tape length Is marked with the [>]
mark.
@The Tape Length Indications change in the
following order:
> [30] 5 [45] >[60}
| [ea 30] [e8 45) [=a 60]
7 Press the [MENU] Button to exit the
Menu Function.
21