Panasonic NV-VX55A - Advanced Operations; Using the Power Save Functions; Using the Auto Power Save Function

MAIN MENU
SPEED »sP
TAPES »30
TTRESET »OFF
Zaps = OFF
Bzdom m42x
> OFF
SHUTTER REC > OFF
SELFSHOT PNOR.
PRESS MENU TO EXIT
: Si) }
ws
y Noh E-lalel-te Mm @lel-Ve-lilel ars)
Using the Power Save
Functions
To ensure economical use of electric power from your
Battery, this Movie Camera is equipped with two Power
Save Functions:
1. Auto Power Save Function (explained below)
2. Anti-Ground Recording Function (~> 42)
Before using these functions, make sure that the LCD
Monitor is completely closed. (while the LCD Monitor is
open, these functions do not become activated.)
If you want to use these functions, set [APS] on the
Main Menu to [ON] so that the [APS] Indication @
appears.
{[APS] means Auto Power Save.) A
Using the Auto Power Save
Function
This function becomes activated only when the Movie
Camera is in the Recording Pause Mode and you tiit the
Movie Camera from the normal horizontal recording
position @ downward by more than about 70° @ for
more than a few seconds.
When this function becomes activated, the Finder turns
off and the [VCR] Lamp flashes.
™ Resuming Recording
When you return the Movie Camera to a roughly
horizontal position @, the Movie Camera is again in the
Recording Pause Mode. Press the Recording Start/Stop
Button to restart recording.
@ Cancelling the Auto Power Save
Function
Set [APS] on the Main Menu [MAIN MENU} to [OFF] so
that the [APS] Indication disappears.
This also cancels the Anti-Ground Recording Function.
(> 42)
41