Panasonic NV-VX55A - Recording with Manual White Balance Adjustment

1 PROGRAMME AE.
Recording with Manual White
Balance Adjustment
With this Movie Camera, you can also adjust the white
balance manually.
Use this mode for special subjects and recording
conditions, such as listed (-» 58), for which the Full Auto
Mode is not suitable, and for light sources outside the
range 1) (-> 60). Use it also when you want to manually
adjust the white balance for each new scene as
professionals do.
With the Digital Zoom Function activated, it may not be
possible to manually adjust the White Balance. In this
case, first cancel the Digital Zoom Function (> 47),
then follow steps 1-3 below. After this, you can activate
the Digital Zoom Function again.
Alternatively, you can zoom back until the zoom
magnification is within the optical zoom range (1 x—
21X), and then perform steps 1-3 below.
Press the [PROGRAMME AE] Button
repeatedly until the [MNL] Indication
appears.
Attach the White Lens Cap and zoom in.
until the entire screen Is white.
3 Aim the Movie Camera at the subject
that you want to record and then keep
the [W.B] Button pressed until the [Nu]
Indication @ stops flashing and
remains lit.
@ Cancelling the Manual White Balance
Mode
Press the [W.B] Button once.
The flashing [x84] Indication indicates that the manually
adjusted white balance setting is being maintained. This
setting is maintained until you manually adjust the white
balance again or change back to recording in the Full
Auto Mode.
59