Panasonic NV-VX55A - Using the Memory Stop Function

M 0:00.00
(@)—- SEARCH+ 5
C1 a]
DATEFITLE COLOUR
STORE OFFION
D.SUPER IMPOSE
send,
205
Using the Memory Stop Function
This function is convenient for temporarily marking a
tape position during recording or playback so that you
can easily find it again tater for playback.
1 Press the [RESET] Button during
recording or playback at the desired
tape position to reset the Elapsed Tape
Time Indication to [0:00.00].
2 Press the [MEMORY] Button so that the
Memory Stop Indication [M] @ appears
in front of the Elapsed Tape Time
Indication.
@{M] means Memory.
3 During playback:
Press the [STOP] Button to stop
playback.
During recording:
Press the Recording Start/Stop Button
to switch the Movie Camera over to the
Recording Pause Mode. Then, press the
[VCR/CAMERA] Button to switch the
Movie Camera over to the VCR Mode
(the [VCR] Lamp lights.)
4 Press the [>>] or [4] Button.
The tape automatically stops approximately at the
[M0:00.00] position.
5 Press the [PLAY] Button to start
playback.
77