Panasonic Omnivision PV-7451 - One Time VCR Setup

One Time VCR Setu
When the VCR power is first turned on,
the language select and channel auto
set screen appear automatically
followed by a prompt to set the clock.
S^Check list before you begin.
O All TV and VCR connections are made.
(See pages 6-9.)
Back of VCR
To Set the Language, Channels, and Clock
Turn TV and VCR on.
Tune TV to VCR output channel (the same
one you set on the back of the VCR; CH3 or CH4).
01
Push CH A for English
on-screen displays.
Push CH T for Spanish
on-screen displays.
SELECT LANGUAGE
PUSH VCR CH A: ENGLISH
PULSE VCR CH T: ESPANOL
APP. VCR/TV : FRANQAIS
If wrong language is
j | p u s h VCR/TV for French
LV j on-screen displays. section on page 5.
• You can also set the language using the buttons on the VCR.
• The VCR should be connected to an antenna or cable box (page 6~9).
Push AT to select your
hookup, and then push ►
to set.
■ If you selected CABLE/DSS BOX
► VCR^TV, continue with step 5.
If not, go to step 6.
VCF^CABLE/DSS BOXHV
VCR»-TV
SELECT:A T KEY
SET : ► KEY
END :MENU KEY
°
Push AT to select your SELECT hookup
cable box or DSS receiver rnmsmm zzssszi
output channel number, cable/oss box output ch
and then push ► to enter. 01101
• If necessary, refer to your set ECT : « ► key
cable box manual. end -menu key
• If you are using Audio/Video jack
connections to your cable box, select
and set “VIDEO OUT” as the output channel.
Push CH A to start Channel Auto Set.
• “PLEASE SET CLOCK BY PUSHING MENU KEY” appears.
Push MENU to display the
SET CLOCK screen.
|-vfr-- SET CLOCK
Push AT to select the
MONTH, and then push ►
to enter.
■ Make each entry within 5 minutes, or
the VCR exits the Set Clock screen.
SELECT :A ▼ KEY
SET : ► KEY
END : MENU KEY
Using AT keys
Whenever a menu or ▼
program screen is displayed,
the PLAY, STOP, REWIND,
and FF buttons on the remote
control function as AT 4 ► only.
For play, stop, rewind, and fast
forward functions, use
the buttons on the VCR.
i ] Push AT and to select
j ar, d set remaining items at right.
| w j * Pushing 4 will move back to an item
for correction.
] Push MENU twice to start
! the clock and exit this
I mode.
Remaining items
to be set:
♦ Date * Year
• Time * D.S.T.
(Daylight Saving Time
see page 5.)
12
SET :•< ► KEY
START :MENU KEY