Panasonic Omnivision PV-7451 - Record On a Tape; One Touch Timer Recording (OTR)

(®) Record^On^Tage
Check list before you begin.
□ All connections are made.
(See pages 6~9.)
CH VCR is Plugged in.
□ TV is turned on and set to the VCR
channel (CH3 or CH4).
Insert a cassette with record tab.
• VCR power comes on automatically.
Push CH A/Y or
NUMBERED keys to
select a channel.
• Or, push CHANNEL A/T
on the VCR.
• Holding down CH A/T
will increase the
channel search speed.
STOP CH02
(STEREO)
(SAP)
MONO «
• To record from an outside
source, push CH A/T or INPUT
to select “LINE1" or “LINE2” (see page 17).
Push SPEED to change
the recording speed.
• SP = Standard Play
LP = Long Play
SLP = Super Long Play
(See page 5.)
■ Push REC/TIME on the remote
•(O) | contro1 or VCR to start recording.
rec/time j . j 0 e dit out unwanted portions, push PAUSE to
— - > pause the recording in progress.
To release, push PAUSE again.
(After the VCR has been in Pause mode for 5
minutes, it will stop automatically to protect the
tape and video head.)
One Touch Timer Recording (OTR)
The VCR starts recording and turns itself off at a preset time.
In step 4, push REC/TIME repeatedly to set the length of the
recording. Each push will change the stop time as shown.
^- ► N ormal Rec— ► 0:30— ► 1:00
‘4:00-4— 3:00-4—2:00-
► 1:00-v
1:30-4-^
“TIMER” lights in the Multi Function Display.
The remaining recording time can be displayed by pushinq
DISPLAY in OTR mode.
Push STOP to
stop recording.
• Or, push STOP/EJECT on the VCR.
16