Panasonic Omnivision PV-7451 - MTS Broadcast and VHS Hi-Fi Stereo System; Receivable Broadcast Audio Types

10)101
@
MTS Broadcast/ VHS Hi-Fi Stereo System
Sfc
Check list before you begin
□ The VCR is connected to a stereo TV, or a mono TV and an external stereo amp or receiver with speakers.
□ The VCR and other components are plugged in and turned on.
Connections
When recording, you may monitor in stereo,
by connecting the VCR to either a stereo TV,
or a mono sound TV with an external stereo
amp and speakers.
Equipped with dbx® -TV Noise Reduction
for true MTS reproduction. dbx* -TV
Noise Reduction is required for good
stereo separation and audio fidelity,
dbx* is a registered trademark, and is
licensed by dbx® Technology Licensing.
Receivable Broadcast Types
The following are possible audio broadcast types and on-screen displays.
Parenthesis indicate signal(s) not being received. The arrow indicates the
selected audio mode.
Push DISPLAY to display the broadcast
pipy s jg n a | currently being received.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo
(main language) and Secondary Audio
Program (sub language) broadcasts are
being received simultaneously. Select
STEREO or SAP audio mode.
STOP 12:00AM CH08
0 : 0 0:00
SLP
STEREO 4
SAP
MONO
MTS Stereo broadcast
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
• If a stereo broadcast is weak and the display
flickers, you may want to select the MONO
audio mode for better results.
f
STOP 12:00AM CH08
0 : 0 0:00
SLP
STEREO 4
(SAP)
MONO
SAP broadcast
Secondary Audio Program (sub language)
broadcast. Select SAP audio mode for the
sub language.
STOP 12:00AM CH08
0 : 0 0:00
SLP
{STEREO)
SAP 4
MONO
MONO broadcast
Normal monaural sound broadcast.
STOP 12:00AM CH08
0 : 0 0:00
SLP
(STEREO)
{SAP)
MONO 4
22