Panasonic Omnivision PV-7451 - Basic Operation Techniques; Selecting Input Source Modes; Recording and Watching Simultaneously

Selecting the Input Mode
Push INPUT. The display will
change in the order below.
C Channel
Number
■ ► L 1NE1
-LINE2
Multi Function
Display
VCR/TV
INPUT
CHANNEL
Up/Down
or
Push CH A/T. The display will
change in the order below.
j * ► 1 — 2 — 3 >v
( (CATV) (TV) J
--—125 or 69«#- / LINE2<«—UNE1«
• LINE1: For rear audio/video connection.
LINE2: For front audio/video connection.
♦ When LINE is selected, “LI” or “L2" is displayed in
the Multi Function Display for about 4 seconds.
Record One Program While Watching Another
1 Push VCR/TV while recording is in progress to turn
off the VCR indicator in the Multi Function Display.
2 Use the TV channel controls to select a program.
The VCR will continue to record your program while
you watch any channel you choose'
• To switch back and forth between the recording and
viewing channel, push VCR/TV.
Selecting Channels at the VCR
1 Turn your TV and VCR on.
* VCR Indicator lights on the Multi Function Display.
If indicator doesn't light, push VCR/TV to turn it on.
2 Use CH A/Y on the remote control or VCR
to select channels.
• To switch back to TV channel selection, push VCR/TV to
turn VCR indicator off, or simply turn the VCR power off.
17
Bas