Panasonic Omnivision PV-7451 - Managing Timer Recordings; Cancelling Timer Recordings; Editing Timer Program Contents; Reviewing and Clearing Timer Programs

1B
mmmmrnmmm
i
immm
wMMmm
.< ■
h
fl
POWER Multi STOP
Function
Display
Cancel a Timer Recording:
(Recording is in progress)
Push POWER and then STOP within 10 seconds to cancel
the timer recording.
* The TIMER indicator goes out in the Multi Function Display.
Replace Program Contents:
(Recording is not in progress)
1 Push PROG to display the “SET
PROGRAM” screen.
2 Push AT to select “TIMER
PROGRAM,” and then push ► to
display all currently set programs.
3 Push AT and ► to select and set a
program number. (See page 18.)
4 Push AT and 4 ► to select and set
replacement timer information.
5 Push PROG twice to exit this mode.
Review or Clear Program Contents:
(Recording is not in progress)
1 Push PROG to display the "SET
PROGRAM” screen.
2 Push AT to select ‘TIMER
PROGRAM,” and then push ► to
display all currently set programs.
3 Push AT to select a program number.
4 Push ADD/DLT to clear the program.
5 Push PROG to exit this mode.
.SET PROGRAM-
VCR Plus* PROGRAM
HEnaassasEn
P DT START STOP CH SPD
2 8 10:00P12:00P125 SLP
3 10 8:00P 9:00P 10 SP
4 SU 9:00P 1O:0OP L SLP
CANCEL:ADD/DLT KEY
SELECT 1 -8:A ▼ KEY
ENTER > KEY
END :PROG KEY
P DT START STOP CH SPD
D---
2 8 10
3 10 8
4 SU 9
OOP 12
OOP 9
00P10
OOP 125 SLP
OOP 10 SP
OOP L SLP
SELECT 1-8:A ▼ KEY
ENTER > KEY
END :PROG KEY
. SET PROGRAM .
VCR Plus* PROGRAM
P DT START STOP CH SPD I
2 8 10 :00P 12
3 10 8 .OOP 9
4 SU 9:OOP 10
OOP 125 SLP
OOP 10 SP
OOP L SLP
SELECT 1 -8:A ▼ KEY
ENTER > KEY
END :PR0G KEY
O ATCI/ START STOP CH
/|'/|\ SLP
SELECT START DATE
SELECT :A ▼ KEY
SET :•< ► KEY
END :PROG KEY
Timer Recording Using VCR Buttons
(Make sure a cassette tape is not inserted in the VCR.)
1 Hold down STOP/EJECT and push REW to enter the
Program mode.
2 Push FF or REC/TIME repeatedly or hold down
to make selections.
3 Push PLAY to set the item and move on.
* To make corrections, repeatedly push PLAY to move the cursor
to the right, or REW to move to the left to the incorrect entry and
make the correction.
4 Push STOP/EJECT and REW together to display program
contents after all items have been entered.
• You cannot clear programs with the VCR buttons.
5 Hold down STOP/EJECT and push REW, (release REW first,
and then release STOP/EJECT) to exit this mode.
6 Insert a cassette with record tab and push POWER off to
set the timer.
19
Basic
Operation