Panasonic Omnivision PV-7451 - Special VCR Features; VCR Lock Feature; Warning Beeper Feature

j SpeclaIVCRFeatures
I^c
Check list before you begin.
□ All connections are made.
(See pages 6~9.)
□ VCR is Plugged in.
□ TV is turned on and set to the VCR
channel (CH3 or CH4).
STOP/EJECT
VCR Lock Feature
When activated, this feature prohibits all operations except for timer
recording and tape eject. This feature is used to keep children from
operating the VCR.
STOP/EJECT
©
Hold down STOP/EJECT on
the VCR for 7 seconds while
in Stop or Power OFF mode.
VCR LOCK ACTIVATED
To Cancel the VCR Lock feature,
hold down STOP/EJECT on the
STOBEJEa VCR for ? sec()nds agajn wh j |g
Ky in Stop or Power OFF mode.
VCR Lock mode is cancelled automatically
after 24 hours as long as the clock is set.
Warning Beeper Feature
When you select BEEPER ON, a short warning will sound each time an
invalid entry or incomplete operation is made.
Push MENU to display
the menu.
. MENU .
^ilM
SET CLOCK
Push AT to select
“SET UP VCR,” and
then push ► to display
the “SET UP VCR” screen.
SET UP CHANNEL
IDIOMA/ LANGUE: ENGL 1SH |
SELECT :a t KEY
SET : ► KEY
END :M£NU KEY
Push AT to select
“BEEPER,” and then
push ► to select “ON”
or “OFF.”
SET UP VCR
REPEAT PLAY : ON
: ON
SELECT:A ▼ KEY
SET : ► KEY
END :MENU KEY
Push MENU twice to exit
this screen.
30