Panasonic Omnivision PV-M2738 - Page 9

If AUTO CLOCK SET IS INCOMPLETE
^ appears, please set the clock manually.
a. Press MENU to display the SET
CLOCK screen.
b. Press to select and ► to
enter the month, date, year, time,
and DST. (Daylight Saving Time).
To Make Corrections,
press repeatedly to move the
cursor to the incorrect entry and * “DST:ON” automatically
make the correction. adjusts tar daylight
C- Press MENU twice to start the saving time. (See page 25.)
clock and exit the MAIN MENU.
To Change the OSD Language
1 Press MENU to display the MAIN MENU.
2 Press AT to select the language selection
icon.
3 Press MENU repeatedly to change the language as
shown.
4 Press AT4^ to select “EXIT,” and then press
MENU to exit the MAIN MENU.
To Replace Channels in Memory
In case, you have cable installed, etc.
1 Press MENU to display the MAIN MENU.
2 Press at t o select “CH,”
and then press MENU to
display the SET UP CHANNEL
screen.
3 Press AT repeatedly to select
“ANTENNA SYSTEM.” and
then press ► to select your
antenna system (“TV" or
“CATV”).
4 Press AT to select “AUTO
SET," and then press
► to start.
• To exit the SET UP CHANNEL
screen, press MENU twice,
To Set or Reset the Clock
In case the clock is wrong, or a power failure occurred.
1 Press MENU to
display the MAIN
MENU.
2 Press AT^^ to
select “CLOCK.”
Then, press MENU
to display the SET
CLOCK screen.
3 Press AT to select
“MANUAL SET,” and
then ► to display
the SET CLOCK
screen.
4 Please do steps b
and c at the top of this page.
To Add or Delete a Channel
1 Select a channel
using the
NUMBERED keys
to add orCH AT
to delete.
2 Press ADD/DLT
to add or delete
the channel.
• To select a channel once it’s deleted, use the
NUMBERED keys.
• This Combination VCR will accurately maintain its calendar up to Dec. 31, 2089,11:59PM.
• Normal TV or Cable channels are automatically selected and placed in memory depending on how
your Combination VCR is hooked up.
9
Getting
Started