Panasonic Omnivision PV-V4540

When set to proper audio mode VCR can:
1) record/playback MTS stereo broadcasts (main language) in Hi-Fi stereo.
2) record/playback mono (main language) or SAP (sub language) broadcasts.
3) playback non Hi-Fi tapes in monaural.
+ The selected broadcast sound is always recorded on left and right Hi-Fi track as well as the normal monaural
track. This means tapes can be played back on Hi-Fi and non-Hi-Fi VCRs.
Audio Mode for Recording
Display audio mode.
SAP/Hi- Fi
a Press SAP/ Hi-Fi.
Select desired mode.
Press SAP/ Hi-Fi
repeatedly (each
press within 5
seconds).
SAP/Hi-Fi
¢ Refer to the “Receivable
. Arrow indicates selection. Broadcast Types’ on page 26.
Do a recording.
See page 9.
3
Audio Mode for Playback
Start playback.
See page 8.
Display audio mode.
SARAN Press SAP/ Hi-Fi.
Select desired mode.
Press SAP/ Hi-Fi
repeatedly (each
press within 5
seconds).
HIFI (L/R) 4
HIFI (L)
HIFI (R)
NORMAL
SAPIHi-Fi
* Select “HIFI(L/R)” or “HIFI(L)” or
“HIFI(R)” to listen to stereo
recordings in stereo sound.
Select “NORMAL” for monaural
sound.
* Arrow indicates selection.
O LIGHT
SAP/
Hi-Fi
O: T-n-
* Only tapes recorded in Hi-Fi stereo
will play back with true stereo sound.
Standard stereo tapes will playback
in monaural sound.
e To listen to Hi-Fi stereo playback, the
VCR AUDIO (UR) jacks must be
connected to a stereo TV or an extemal
ey amp and speakers. (See page
26.
e If tracking is adjusted during playback,
Hi-Fi audio may revert to normal audio.
e Hi-Fi and normal audio playback volume
level may differ.
21
13ISÁS 094918 I4-IH SHAASP9Peo1g SLN