Panasonic Omnivision PV-V4540

*Important: If the remote control POW | ys,
INPUT, SEARCH or ADD/DLT button does not done when pressed, press she VCR
button on the remote and try the button again.
Weak Signal Display ON/OFF Feature
When "ON” is selected, picture is displayed even when broadcast
signal is weak or nonexistent.
Display MENU.
Press ACTION.*
IS Display SET UP CHANNEL.
SET UP FEATURE
SET CLOCK
SET UP CHANNEL . 1) Press AV to
IDIOMA/ LANGUE: ENGLI SH| | - <> select.
VCR' S OUTPUT CH:3 ; ;
SELECT:@ Y KEY = 2) Press P to
SET :» KEY
END :ACTION KEY display.
2 SELECT/
SET
UP
CHANNEL
Set
ON
or
OFF.
SET
1) Press AV to
select.
2) Press P to set.
SELECT:4 Y KEY
SET ¡> KEY
END :ACTION KEY
* ON --> Picture is displayed regardless of signal condition, and
may not always be clearly visible.
OFF --> Screen tums solid blue when signal is absent or weak.
* If VCR is connected to equipment which has blue back feature,
p= - PAM ON MO RO econ (a oner ene T ON will have no effect on the other equipment.
Return to normal
4
screen.
Press ACTION twice.
Auto Shut-Off Feature
When “ON” is selected, VCR shuts itself off when playback of a
blank portion of tape continues or no signal (except when LINE is
selected) is detected for over 5 minutes.
Repeat step “a” and “b” on page 32 to
display SET UP VCR.
$3/1834 HOA ¡er9ads
b SET UP VCR Set ON or OFF.
REPEAT PLAY 1) Press AY to
select.
2) Press P to set.
AUTO SHUT-OFF
SELECT:4 Y KEY
SET z> KEY
END :ACTION KEY
Return to normal
C A screen.
Press ACTION twice.
33