Panasonic Omnivision PV-V4620 - Start Playback

When set to proper audio mode VCR can:
1) record/playback MTS stereo broadcasts (main language) in Hi-Fi stereo.
2) record/playback mono (main language) or SAP (sub language) broadcasts.
3) playback non Hi-Fi tapes in monaural.
* The selected broadcast sound is always recorded on left and right Hi-Fi track as well as the normal monaural
track. This means tapes can be played back on Hi-Fi and non-Hi-Fi VCRs.
Audio Mode for Recording
SAP/Hi-Fi
Display
audio
mode.
Press
SAP/
Hi-Fi.
Select desired mode.
Press SAP/ Hi-Fi
SAPIH-Fi | repeatedly (each
(oo) | press within 5
seconds).
(«STEREO
« Refer to the “Receivable
* Arrow indicates selection. Broadcast Types” on page 30.
Do a recording.
See page 9.
Audio Mode for Playback
Start playback.
See page 8.
a Display audio mode.
E) Press SAP/ Hi-Fi.
Select desired mode.
Press SAP/ Hi-Fi
SAPHi-Fi | repeatedly (each
press within 5
seconds).
HIFI (L/R) 4
HIFI {L)
HIFI {RÌ
NORMAL
e Select “HIFI{L/R)” or “HIFI{L)” or
“HIFI(R)” to listen to stereo
recordings in stereo sound.
Select “NORMAL” for monaural
sound.
* Arrow indicates selection.
PAUSE CA SKIP SPEED SEARCH
M/A SKIP
O: O-N
SAP/
1 Hi-Fi
« Only tapes recorded in Hi-Fi stereo
will play back with true stereo sound.
Standard stereo tapes will playback
in monaural sound.
To listen to Hi-Fi stereo playback, the
VCR AUDIO (L/R) jacks must be
connected to a stereo TV or an
external stereo amp and speakers.
(See page 30.)
if tracking is adjusted during playback,
Hi-Fi audio may revert to normal
audio.
Hi-Fi and normal audio playback
volume level may differ.
31
Wia}SAS 091918 I4-IH SHAASPOpeolg SL