Panasonic Omnivision PV-V4620 User Manual

VCR & Cassette Information
Reset All VCR Memory Functions
Use when moving VCR to new location, or if a mistake
was made in the One Time VCR Setup section.
* Make sure a tape is not inserted in the VCR.
1 TurnVCR
Power on.
2 Press and hold both PLAY
and CHANNEL A on the VCR
for more than 5 seconds
AR
e The power will shut off.
3 Do “One Time VCR Setup” steps on page 6.
DST (Daylight Saving Time)
VCR auto adjusts clock for DST. (Page 7.)
Spring (First Sunday in Apri!)
DST:ON --> sets clock ahead one hour.
Autumn (Last Sunday in October)
DST:ON --> Turns clock back one hour.
* If your area does not observe Daylight Saving
Time, select DST:OFF.
e Keep these time changes in mind when
programming the VCR for timer recordings.
40
Prevent Accidental Tape Erasure
Break off the tab.
Record Tab
Screw driver WN
| To record again A S |
Cover
the
E
with
cellophane
tape.
Record/Playback Time
Onty use tapes with the mark in this unit.
Type of Video Cassette
2 Hours
2 Ho 4 Hours SHours
3 Hours 6 Hours
Tape Speed
Setting
SP
(Standard Play)
LP
(Long Play)
SLP
(Super Long Play)
For assistance, call 1-800-211-PANA(7262).

Panasonic Omnivision PV-V4620 Specifications

General

Brand	Panasonic
Model	Omnivision PV-V4620
Category	VCR
Language	English