Panasonic Omnivision PV-V4620 User Manual

*Important: If the remote control POWER, ACTION, PROG/VCR+, CHA/W, NUMBERED keys,
INPUT, SEARCH/ M/A SKIP or ADD/DLT button does not work when pressed, press
the VCR button on the remote and try the button again.
Weak Signal Display ON/OFF Feature
When “ON” is selected, picture is displayed even when broadcast
signal is weak or nonexistent.
1 Display MENU.
Press ACTION.*
MENU Display SET UP (ew) Display SET UP CHANNEL.
SET UP VCR
ser
cio
~~ |) Press AY to
peas select.
SELECT:4 Y KEY ` a ES 12) Press > to
SET : KEY AL y i
END :ACTION KEY : : display.
ECT LIG
Set ON or OFF. 2 SELECT!
1) Press AY to A ¡PLAY Y
select. * Y STOP p
/ |2) Press > to set. > :FF as"
SELECT: 4 Y KEY <
SET :» KEY
END :ACTION KEY Q
* ON --> Picture is displayed regardless of signal condition, and
may not always be ciearly visible. j 1 ACTION al
OFF --> Screen turns solid blue when signal is absent or weak. Y y
» If VCR is connected to equipment which has blue back feature, 4 c
-eng EN M ave NA SUREE e ma, ON will have no effect on the other equipment. » a
C (i
Return to normal
4 screen.
Press ACTION twice.
Auto Shut-Off Feature
When “ON” is selected, VCR shuts itself off when playback of a
blank portion of tape continues or no signal (except when LINE is
selected) is detected for over 5 minutes.
Repeat step “a” and “b” on page 36 to
display SET UP VCR.
/ SET UP VCR Set ON or OFF.
REPEAT PLAY mo 11) Press AY to
select.
AUTO SHUT-OFF
SELECT:4 ¥ KEY
; Y
2) Press > to set.
: ACTION KEY
C Return to normal
4 screen.
Press ACTION twice.
37

Panasonic Omnivision PV-V4620 Specifications

General

Brand	Panasonic
Model	Omnivision PV-V4620
Category	VCR
Language	English