Panasonic Omnivision PV-V4620 User Manual

*Important: If the remote control POWER, ACTION, PROG/VCR+, CH4/¥, NUMBERED keys,
INPUT, SEARCH/MA SKIP or ADD/DLT button does not work when pressed, press
the VCR button on the remote and try the button again.
CHANNEL/ CLOCK AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE ô
BOX, TUNE IT TO YOUR $
LOCAL PBS CH THEN... CH E
v
PLEASE PUSH CH UP KEY
| CH AUTO SET PROCEEDING |
| i AUTO CLOCK SET |
_PROCEED ING
i} (Setup completed)
1/ 4/2000 TUE 12:00PM
DST:ON
SETTING : CH 02
AUTO CLOCK SET
COMPLETED Press CH A
to exit.
END ; PUSH CH UP KEY
* If your area observes DST (daylight
saving time), but the time is incorrect; do
the “Time Zone Adjust” steps on page 39.
SELECT/
SET
A PLAY
Y ¿STOP
d REW
> -FF
ACTION
COUNTER RESET DISPLAY TAPE POSITION
PAUSE C/A SKIP SPEED SEARCH
Start Channel Auto Set
and Clock Auto Set.
Press CH A.
IMPORTANT NOTE FOR
AUTO CLOCK SET
Auto clock set is performed the
first time the VCR is turned off
each day. If used, a cable box
must be left on and tuned to the
PBS channel at the time VCR
power is turned off if you want auto
clock set to be done.
lf used, a DSS receiver must be
turned off for auto clock set.
If Cable Box or DSS receiver is
connected to VCR via Audio/Video
jacks, an RF coaxial cable must
also be connected for auto clock
set and channel auto set features
to work.
(Setup incomplete}
Clock Setup incomplete.
Set the clock manually.
A 1) Press ACTION.
AUTO CLOCK SET
1S INCOMPLETE
PUSH ACTION TO SET CLOCK
2) Press AY to
SET_CLOCK
select month.
- 13) Press » to set.
SELECT MONTH
SELECT: 4 Y KEY
SET z> KEY
END :ACTION KEY
* Likewise, set date, year, time,
DST (Daylight Saving Time).
To Make Corrections,
repeatedly press € > to move to
error, then correct.
A 4} Press ACTION.
SET CLOCK
1/ 4/2000 TUE 12:00PM
ET COMPLETED (Clock starts.)
* To exit this
mode, press
SET :4 > KEY .
START ‘ACTION KEY ACTION again.
+ VCR calendar is accurately maintained to
Dec. 31, 2096 11:59PM.
¢ Channel auto set selects normal TV or Cable
channels depending on your VCR hookup.
» To reset Language, Channels, Clock or
VCR's Output Channel see pages 38 and 39.
Using AV<4P keys
You can also operate the menu
screen using VCR buttons.
When menu screens are ‘
displayed, the PLAY, STOP, | a» a
REWIND, and FF buttons on EE
the VCR and remote function | - ~ :
as AY 4» only with no tape
inserted,
To display menu using VCR
buttons, press CH A and CH
Y together.
To exit the menu, repeat above.
~
On Remote
A : PLAY 4: REW
Y: STOP »: FF
dn3as HOA au suo

Panasonic Omnivision PV-V4620 Specifications

General

Brand	Panasonic
Model	Omnivision PV-V4620
Category	VCR
Language	English