Panasonic PT-AE7000U

Menu navigation
38 - ENGLISH
Settings
Menu list
The on-screen menu is used for settings and
adjustments on this projector.
See “Navigating through the menu” for details of on-
screen menu operation. (

page 37)
The submenu of the main menu is displayed, and
setting/adjustment for each item can be performed.
[
■
PICTURE]
S-VIDEO IN/VIDEO IN/COMPONENT (YC
●
B
C
R
/
YP
B
P
R
) signal input/HDMI
Submenu items
Default
setting
Page
[PICTURE MODE] [NORMAL] 40
[CONTRAST] [0] 40
[BRIGHTNESS] [0] 40
[COLOR] [0] 40
[TINT] [0] 40
[COLOR TEMPERATURE] [0] 41
[SHARPNESS] [SIMPLE] 41
[DYNAMIC IRIS] [ON] 41
[WAVEFORM MONITOR] — 41
[SPLIT ADJUST] — 44
[ADVANCED MENU] — 45
[PICTURE MEMORY] — 55
SIGNAL MODE
*1
56
*1: COMPONENT IN/HDMI IN only
COMPUTER (RGB) signal input
●
Submenu items
Default
setting
Page
[PICTURE MODE] [NORMAL] 40
[CONTRAST] [0] 40
[BRIGHTNESS] [0] 40
[COLOR TEMPERATURE] [0] 41
[SHARPNESS] [SIMPLE] 41
[DYNAMIC IRIS] [ON] 41
[WAVEFORM MONITOR] — 41
[SPLIT ADJUST] — 44
[ADVANCED MENU] — 45
[PICTURE MEMORY] — 55
SIGNAL MODE 56
[
■
POSITION]
S-VIDEO IN/VIDEO IN
●
Submenu items
Default
setting
Page
[H-POSITION] [0] 57
[V-POSITION] [0] 57
[ASPECT] [AUTO] 58
[WSS]
*1
[ON] 60
[OVER SCAN] [+7] 60
[KEYSTONE] [0] 60
*1: PAL signal input only
COMPONENT IN/COMPUTER IN
●
Submenu items
Default
setting
Page
[H-POSITION] [0] 57
[V-POSITION] [0] 57
[DOT CLOCK]
*1
[0] 57
[CLOCK PHASE]
*2
[0] 57
[ASPECT] [16:9] 58
[WSS]
*3
[ON] 60
[OVER SCAN]
*4
[0] 60
[KEYSTONE] [0] 60
[AUTO SETUP]
*5
— 60
*1: COMPUTER IN only (exc. 480i, 576i, 480p, 576p)
*2: Exc. 480i/576i
*3: COMPONENT IN (576i, 576p) only
*4: COMPONENT IN and COMPUTER signal (movie
based signals) input only
*5: COMPUTER IN (RGB) signals only (exc. movie
based signals)
HDMI IN
●
Submenu items
Default
setting
Page
[H-POSITION] [0] 57
[V-POSITION] [0] 57
[ASPECT] [16:9] 58
[OVER SCAN] [0] 60
[KEYSTONE] [0] 60
Note
The default settings may be different depending on the
z
picture menu.