Panasonic PT-AE7000U

Ceiling mount bracket safeguards
90 - ENGLISH
Maintenance
Ceiling mount bracket safeguards
When mounting the projector on the ceiling, use the Panasonic specied ceiling mount bracket (model no.: ET-PKA110H (for
z
high ceilings) and ET-PKA110S (for low ceilings)).
Installation work of the ceiling mount bracket should only be carried by a qualied technician.
z
Even during the guarantee period, the manufacturer is not responsible for any hazard or damage caused by using a ceiling
z
mount bracket which is not purchased from an authorized distributors, or environmental conditions.
Unused ceiling mount brackets should be removed promptly by a qualied technician.
z
Be sure to use a torque driver. Do not use an electrical screwdriver or an impact screwdriver.
z
See the installation instructions of the ceiling mount bracket for details.
z
The model number of accessories and optional accessories is subject to change without notice.
z
9 mm
M4 × 0.7
Model No. of ceiling mount bracket: ET-PKA110H (for high ceiling)
ET-PKA110S (for low ceiling)
Bottom view
Torque: 1.25 ± 0.2 N·m
Holes for ceiling mount bracket
attachment screws