Panasonic PT-AE8000U

2. 5. Removal of L-P.C.Board
1. Remove the Optical block according to the steps 1 through 6 in the section 2.4. "Removal of Optical Block / Analysis Block"
.
2. Unscrew the 2 screws and remove the LED cover.
3. While pushing the LED cover in the direction of the arrow, and remove a LED fix tool.
4. Unscrew the 1 screw and remove the L-P.C.Board.
2. 6. Removal of M3 P.C.Board
1. Remove the Analysis block according to the section 2.4. "Removal of Optical Block / Analysis Block".
2. Unscrew the 1 screw and remove the A-P.C.Board earth metal.
3. Unscrew the 3 screws and remove the Intake duct.
Note : Duct sheets is removed before removing intake duct.
When assembling, please replace with new duct sheets.
L-P.C.Board
LED fix tool
Intake duct
A
-P.C.Board
earth metal
Intake duct fixing metal
LED cove
r
LED fix tool
* A pin of LED fix tool being inserted
in the hole of the lens unit at the
assembling.
LED cove
r
Optical block
XTBT969FJ
K
XTBT969FJ
K
XTBT969FJ
K
XYN3+F6FJ
DUCT SHEET 2
(TMKH529)
INTAKE DUCT
DUCT SHEET 1
(TMKH528)
INTAKE DUCT
DIS-6