Panasonic PT-AE8000U

2. 8. Removal of P-P.C.Board / B-P.C.Board
1. Remove the Top Cover according to the section 2.2 "Removal of Top Cover".
2. Loosen the 2 screws and remove the Lamp unit.
3. Unscrew the 3 screws and remove the Lamp house.
4. Unscrew the 1 screw and remove the Lamp socket.
5. Unscrew the 5 screws and remove the Ballast block.
* Remove the P2 connector.
6. Unscrew the 2 screws and remove the P-P.C.Board.
Lamp house
Lamp socket
Ballast block
P-P.C.Board
XYN3+F6FJ
XTBT969FJ
K
XTW3+8PFJ
XYN3+F6FJ
DIS-8