Panasonic PT-AE8000U

Technical information
100 - ENGLISH
Appendix
List of compatible signals
The following table species the types of signals compatible with the projectors.
Format: V: VIDEO, S: S VIDEO, R: RGB, Y: YC
B
C
R
/YP
B
P
R
, H: HDMI
Mode SIGNAL MODE
Display
resolution
(dots)
*1
Scanning frequency
Dot clock
frequency
(MHz)
Format
Plug
and play
compatible
HDMI
H
(kHz)
V
(Hz)
NTSC/NTSC 4.43/
PAL-M/PAL60
— 720 × 480i 15.7 59.9 —
V/S
—
PAL/PAL-N/SECAM — 720 × 576i 15.6 50.0 — —
525i (480i) 480i 720 × 480i 15.7 59.9 13.5
R/Y
—
625i (576i) 576i 720 × 576i 15.6 50.0 13.5 —
525p (480p) 480p 720 × 483 31.5 59.9 27.0
R/Y/H
○
625p (576p) 576p 720 × 576 31.3 50.0 27.0 ○
750 (720)/60p 720/60p 1 280 × 720 45.0 60.0 74.3 ○
750 (720)/50p 720/50p 1 280 × 720 37.5 50.0 74.3 ○
1 125 (1 080)/60i 1 080/60i 1 920 ×1 080i 33.8 60.0 74.3 ○
1 125 (1 080)/50i 1 080/50i 1 920 ×1 080i 28.1 50.0 74.3 ○
1 125 (1 080)/24p 1 080/24p 1 920 ×1 080 27.0 24.0 74.3 ○
1 125 (1 080)/60p 1 080/60p 1 920 ×1 080 67.5 60.0 148.5 ○
1 125 (1 080)/50p 1 080/50p 1 920 ×1 080 56.3 50.0 148.5 ○
VGA
VGA60 640 × 480 31.5 59.9 25.2
R
—
VGA75 640 × 480 37.5 75.0 31.5 —
VGA85 640 × 480 43.3 85.0 36.0 —
SVGA
SVGA56 800 × 600 35.2 56.3 36.0 —
SVGA60 800 × 600 37.9 60.3 40.0 —
SVGA72 800 × 600 48.1 72.2 50.0 —
SVGA75 800 × 600 46.9 75.0 49.5 —
SVGA85 800 × 600 53.7 85.1 56.3 —
XGA
XGA60 1 024 × 768 48.4 60.0 65.0 —
XGA70 1 024 × 768 56.5 70.1 75.0 —
XGA75 1 024 × 768 60.0 75.0 78.8 —
XGA85 1 024 × 768 68.7 85.0 94.5 —
MXGA
MXGA70 1 152 × 864 64.0 70.0 94.2 —
MXGA75 1 152 × 864 67.5 74.9 108.0 —
1 280 × 720 1 280 × 720/60 1 280 × 720 44.8 59.9 74.5 —
1 280 × 768 1 280× 768/60 1 280 × 768 47.8 59.9 79.5 —
1 280 × 800 1 280 × 800/60 1 280 × 800 49.7 59.8 83.5 —
SXGA SXGA60 1 280 × 1 024 64.0 60.0 108.0 —
SXGA+ SXGA+60 1 400 × 1 050 65.2 60.0 122.6 —
WXGA+ WXGA+60 1 440 × 900 55.9 59.9 106.5 —
1 920 ×1 080
1 920 ×1 080/60 1 920 × 1 080
*2
66.6 59.9 138.5 —
1 920 ×1 080/50 1 920 × 1 080 55.6 49.9 141.5 —
WUXGA WUXGA60RB 1 920 × 1 200
*2
74.0 60.0 154.0 —
*1 : The “i” displayed after the resolution indicates an interlaced signal.
*2 : VESA CVT-RB (Reduced Blanking) compatible.
Note
z
The number of display dots for the PT-AE8000U display is 1 920 x 1 080.
A signal with a different resolution will be projected after converting the resolution to match the projector display.
z
When interlaced signals are connected, icker may occur on the projected image.
Technical information