Switching the projector on/off
30 -
ENGLISH
Basic Operation
Switching off the power
Carefully check the status of the power indicator before operating.
4)
1) - 3)
Power indicator
1) Press the power < / | > button.
z
The conrmation message is displayed.
2) Select [OK] with the
▲
▼
buttons.
3) Press the <ENTER> button (or press the
power <
/ | > button again).
z
The lamp extinguishes and video projection halts.
z
The cooling fan continues to operate and the power
indicator illuminates orange. Wait for the power
indicator to turn red or start ashing red.
4) Press the <OFF> side of the <MAIN
POWER> switch to turn off the power.
z
Never switch off the main power or remove the
power cord when the cooling fan is operating.
Note
z
Select [CANCEL] or press the <MENU> or <RETURN>
button to close the power off conrmation message.
z
The power can also be switched off when the power < / | >
button is held down for 0.5 seconds or more.
To Next Page
Loading...
