Care and replacement
88 -
ENGLISH
Maintenance
4) Attach the air lter unit to the projector.
z
Attach the air lter unit to the projector using the
reverse of the procedure in 2).
* Insert the air lter unit into the projector in the
direction of the arrow engraved into the air lter
frame (
UP
)
until it clicks into place.
5) Attach the air lter cover, and rmly
tighten the air lter cover xing screw
(one) with a Philips screwdriver.
Attention
z
The air lter unit must always be installed in the projector.
Failure to do so will result in malfunctions due to foreign
materials, such as dust, entering the projector.
z
Do not use water to wash the air lter unit as this
decreases its ability to absorb dust.
To Next Page
Loading...
