Panasonic PT-AT5000E - Specifications

Specications
100 - ENGLISH
Appendix
Specications
The following table describes the specications of the projector.
Power supply AC 100-240 V 50 Hz/60 Hz
Power consumption
Less than 285 W
During standby (when fan is stopped): 0.08 W
Amps 3.5 A - 1.3 A
LCD panel
Panel size (diagonal) 18.7 mm (0.74")
Aspect ratio 16 : 9
Display method 3 transparent LCD panels (RGB)
Drive method Active matrix method
Pixels 2 073 600 (1 920 x 1 080) x 3 panels
Lens
Motorized zoom (2x)/Motorized focus
F 1.9 - 3.2, f 22.4 mm - 44.8 mm
Lamp UHM lamp (200 W)
Luminosity
*1
2 000 lm
Operating environment
Temperature
0 °C - 40 °C (32 °F - 104 °F)
When [HIGH ALTITUDE MODE]
(

page 76) is set to [ON]: 0 °C -
35 °C (32 °F - 95 °F)
Humidity 20% - 80% (no condensation)
Scanning
frequency
*2
(for RGB signal)
Horizontal scanning
frequency
15 kHz - 74 kHz
Vertical scanning
frequency
24 Hz - 85 Hz
Dot clock frequency Less than 154 MHz
COMPONENT (YP
B
P
R
) signals
525i (480i), 525p (480p), 625i (576i), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1 125 (1 080)/60i, 1 125 (1 080)/50i,
1 125 (1 080)/60p, 1 125 (1 080)/50p, 1 125 (1 080)/24p
Colour system 7 (NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/PAL60/SECAM)
Projection size
When displaying 3D images 1.02 m - 5.08 m (40" - 200")
When displaying 2D images 1.02 m - 7.62 m (40" - 300")
Projection distance
When displaying 3D images 1.2 m - 12.0 m (3'11" - 39’4")
When displaying 2D images 1.2 m - 18.1 m (3'11" - 59’5")
Screen aspect ratio 16 : 9
Installation
FRONT/DESK, FRONT/CEILING, REAR/DESK, REAR/CEILING
(Menu selection method)
Measurement, measuring conditions and method of notation all comply with ISO21118 international *1.
standards.
For details of video signals that can be projected with this projector, see the “*2. List of compatible signals”
(

page 95).