Precautions for use
ENGLISH - 15
Introduction
■
Installation precautions
Do not stack projectors.
z
Do not cover the projector’s air intake port or air exhaust port.
z
Install the projector so that cold air or hot air from air conditioners does not come in to direct contact with the air intake port
z
or air exhaust port.
100 mm (4") or more
Air intake port
Air intake port
Air exhaust port
100 mm (4") or more 100 mm (4") or more
z
Do not install the projector in an enclosed space.
If the projector needs to be installed in an enclosure, provide a separate air conditioning unit or ventilating equipment.
Emitted heat accumulates if ventilation is insufcient. This may cause the protection circuit of the projector to operate.
Use the front adjustable feet for oor installation only and for angle adjustment in such cases.
z
If you use the adjustable feet for any other purpose, the set may be damaged.
To Next Page
Loading...
