About Your Projector
ENGLISH -
17
Preparation
Control Panel and Indicators
(1) <ON(G) / STANDBY(R)> indicator
Indicates the projector’s status.
(2) <
>
button
Turns the projector on/off.
(3) <MENU> button
Turns the main menu on/off.
(4)
Remote control signal receiver
(5)
▲▼◄► buttons
Uses to operate menu.
(6) <AUTO ADJ.> button
Automatically synchronize the projector to the
input source for computer input.
Note
The <AUTO ADJ.> operation may not optimize the image
z
position or the resolution, depending on the input signal
format or the image contents. In this case, switch to a
different image and execute <AUTO ADJ.> again.
(7)
<INPUT> button
Displays [Source] menu. (
Æ
page 31)
(8) <LAMP> indicator
Indicates the projector’s lamp status.
(9) <TEMP> indicator
Indicates the status of the internal temperature or
the cooling fan of the projector.
To Next Page
Loading...
