Panasonic PT-CW330E

About Your Projector
18
- ENGLISH
Preparation
Connecting terminals
2 3 4
7
6
5
10
9
1
8
(
1) <MINI USB>
For service use.
(2) <HDMI IN> Input
Connects to HDMI input signals.
(3) <MONITOR OUT>
Outputs COMPUTER 1 or COMPUTER 2 signals
input to the projector.
(4) <LAN>
Connects to a LAN cable for network connection.
(5) <S-VIDEO IN>
<S-VIDEO AUDIO IN>
Connects to S-VIDEO IN input signal and AUDIO
IN signal.
(6) <VARIABLE AUDIO OUT>
Outputs the audio signals input to the projector.
(7) <SERIAL IN>
Connects to a computer via an RS-232C cable.
(8) <COMPUTER 1 IN>
<COMPUTER 1 AUDIO IN>
Connects to COMPUTER 1 IN input signal and
AUDIO 1 IN signal.
(9) <COMPUTER 2 IN>
<COMPUTER 2 AUDIO IN>
Connects to COMPUTER 2 IN input signal and
AUDIO 2 IN signal.
(10) <VIDEO IN>
<VIDEO AUDIO IN>
Connects to VIDEO IN input signal and AUDIO IN
signal.
Attention
When a LAN cable is directly connected to the projector,
z
the network connection must be made indoors.
Note
When the <HDMI IN> terminal is connected to a computer
z
via a HDMI-DVI conversion cable, it can only input video
signal and the analog audio signal can not be input.