Setting up
ENGLISH -
21
Getting Started
Adjusting Projection Image Size
For the setting of this projector, please refer to the following diagram or the projection distance on the next page.
Attention
Before installing, please read “Precautions for Use”. (
z
Æ
pages 11 to 14)
Do not use the projector and the high-powered laser equipment in the same room. Hitting of a laser beam on to the lens
z
can damage the DLP chips.
SH Height of the projection area (m)
SW Width of the projection area (m)
SD
Diagonal length of the projection
area (m)
Note
Make sure the surface of the proejction screen not be bended, otherwise the projection image may not be projected
z
correctly.
Throw distance A
Throw distance B
Projector top to
Bottom of the screen
Projector bottom to
Bottom of the screen
Projected image
SW
SD
SH
To Next Page
Loading...
