11.6. Removal of PB-Module
(1) Remove the lamp unit according to the section 11.10. "Removal
of Lamp Unit".
(2) Remove the top cover according to the section 11.2. "Removal of
Top cover".
(3) Unscrew the 1 screw and remove the grounding terminal.
(4) Unscrew the 6 screws and emove the shield case.
(5) Unscrew the 2 screws and remove the lamp duct.
30
PT-D3500U / PT-D3500E
To Next Page
Loading...
