Panasonic PT-D3500U

(5) Set the operation mode selector (Computer/Numeric, Projector) switch
to “Projector” on the remote control unit and press the ENTER button.
(6) Press the MENU button.
Note:
· "SERVICEMAN" will appear.
4.2. Resetting to User Mode
(1) Press the MENU button.
The MENU screen will appear.
(2) Select “OPTION2” using the or buttons and press the
ENTER button.
The OPTION2 screen will appear.
(3) Select PASSWORD using the or buttons and press the
ENTER button.
The PASSWORD screen will appear.
(4) Set the operation mode selector (Computer/Numeric, Projector) switch
to "Computer/Numeric" on the remote control unit and input the
password "0000".
Note:
· Asterisk (*) will appear for the password numbers.
(5) Set the operation mode selector (Computer/Numeric, Projector) switch
to "Projector" on the remote control unit and press the ENTER button.
(6) Press the MENU button.
Note:
· "USER" will appear.
8
PT-D3500U / PT-D3500E