(3) Loosen each of 2 screws fixing the lamp unit until they idle, hold
the grip and take the lamp unit out.
11.11. Removal of Projection Lens
(1) Fully turn the projection Lens counterclockwise.
(2) Turn the projection lens counterclockwise in addition while
pressing the lens lock button.
(3) Remove the projection lens.
11.12. Removal of Analysis Block
(1) Remove the upper case according to the section 11.2. "Removal
of Upper Case".
(2) Loosen the 2 screws until they idle and open the exhaust fan
units 1 and 2 outside.
(3) Loosen each of 2 screws fixing the lamp units until they idle,
remove the lamp units 1 and 2.
(4) Unscrew the 2 screws and remove the CW fan fixing metal with
fan and the cooling plate.
32
PT-D5600U / PT-D5600E / PT-D5600UL / PT-D5600EL / PT-DW5000U / PT-DW5000E / PT-DW5000UL / PT-DW5000EL
To Next Page
Loading...
