Panasonic PT-D5600U - Removal of Ballast-1 and Ballast-2 Modules

11.9. Removal of Ballast-1 and Ballast-2 Modules
(1) Remove the upper case according to the section 11.2. "Removal
of Upper Case".
(2) Unscrew the 2 screws and remove the CW fan fixing metal and
the cooling plate.
(3) Unscrew the 3 screws and release the grounding terminals.
(4) Unscrew the 2 screws and release the lamp unit terminals.
(5) Loosen the 2 screws until they idle and open the exhaust fan unit
2.
(6) Loosen the 2 screws fixing the lamp unit until they idle and
remove the lamp unit 2.
29
PT-D5600U / PT-D5600E / PT-D5600UL / PT-D5600EL / PT-DW5000U / PT-DW5000E / PT-DW5000UL / PT-DW5000EL