Panasonic PT-DS100XE - Page 5

ENGLISH -
5
Important
Information
PreparationGetting StartedBasic OperationSettingsMaintenanceAppendix
While the luminance is the same as
the former model, the size is reduced
to about 1/2.
Volume Approx. 120 liters : PT-D10000E
Volume Approx. 60 liters : PT-DZ110XE
The lamp replacement cycle is longer
than the existing model. (
Æ
page 111)
Approx. 2 000 hours : PT-D10000E
(When four lamps are used)
Approx. 3 000 hours : PT-DZ110XE
(two lamps LAMP POWER : [HIGH])
The standby power is much less than
the existing model.
Approx. 25 W : PT-D10000E
Approx. 0.3 W : PT-DZ110XE
(STANDBY MODE : [ECO])
Reduced in size
Lengthened lamp
replacement cycle
Reduced standby power
Quick steps
J
For details, see the corresponding pages.
1. Set up your projector.
(
Æ
page 22)
2. Attach the projection lens.
(
Æ
page 38)
3. Connect with other devices.
(
Æ
page 35)
4. Connect the power cord.
(
Æ
page 39)
5. Start projecting.
(
Æ
page 40)
6. Select the input signal.
(
Æ
page 42)
7. Adjust the image.
(
Æ
page 42)