Panasonic PT-DW530U

13
NETWORK menu (continued)
Press ▲▼ to select an item, and change the setting according to the instructions.
2
NAME CHANGE You can change the user name.
DHCP
_
(DHCP client function)
ON: If a DHCP server exists in the network to which the projector is
connected, the IP address will automatically be acquired.
OFF: If a DHCP server does not exist in the network to which the
projector is connected, additionally set [IP ADDRESS
_
],
[SUBNET MASK
_
] and [DEFAULT GATEWAY
_
].
IP ADDRESS
_
(Display of IP address and setting)
Enter the IP address if DHCP server is not used.
SUBNET MASK
_
(Displaying and setting the subnet
mask)
If not using a DHCP server, enter the subnet mask.
DEFAULT GATEWAY
_
(Display of gateway address and
setting)
Enter the gateway address if DHCP server is not used.
“Glossary” ( _ See page 40 – 41)
Note
A wired LAN and wireless LAN cannot be used in the same segment.
Select [NEXT] on the [WIRELESS LAN] screen (1/2) to switch to the [WIRELESS LAN] conguration screen (2/2).
Make the settings related to the wireless connection between the projector and the network.
Select [CANCEL] instead of [NEXT] to cancel the conguration change.
WIRELESS LAN
2/3
SSID
Panasonic Projector
MODE
AD HOC
AUTHENTICATION
OPEN
ENCRYPTION
NONE
CHANNEL
11
RETURN NEXT CANCEL
ENTER
MENU SELECT
ADJUST
SSID ●
_
：
If the mode is [AD HOC], enter the same character string as that of SSID set on
the computer to be connected. If the mode is [INFRASTRUCTURE
_
], enter the
SSID registered at the access point
_
.
Note
SSID has to be entered in alphanumeric letters. ・
You cannot set “any” or “ANY” for SSID. ・
MODE ●
：
Select [AD HOC] or [INFRASTRUCTURE].
AD HOC
_
：
Connect projector and computer directly without access point.
INFRASTRUCTURE
_
：
Connect through access point.
“Glossary” (See page 40 – 41)