What you can do
＜WEB control＞ （See page 21）
The following operations are possible when using WebBrowser.
Setting and adjusting the projector ・
Displaying the projector status ・
Setting for message transmission ・
＜PJLink＞（See page 37）
Compatible with PJLink Class 1. The following operations can be performed from a computer when PJLink protocol
is used.
Setting the projector ・
Querying the projector status ・
＜Command control＞
You can control the projector from a computer, using the control commands of the serial terminals.
To use [WEB CONTROL], [PJLink], or [COMMAND CONTROL], set [WEB CONTROL], [PJLink CONTROL],
or [COMMAND CONTROL] under [NETWORK CONTROL] in the [NETWORK] menu of the projector to [ON],
respectively (See page 15).
Application software supplied in the CD-ROM ■
Multi Projector Monitoring & Control Software (Windows) ●
Software for monitoring and controlling multiple projectors connected via LAN.
Logo Transfer Software (Windows) ●
Software for transferring a user’s unique image such as a company logo to be projected at the beginning.
Wireless Manager mobile edition 5.5 (Windows/Macintosh) ●
Software for sending the computer screen via wireless/wired LAN.
For the usage of the software listed above, see the operation manual for each software in the supplied CD-ROM,
and for the restrictions, see “List of Compatible Projector Models”.
To Next Page
Loading...
