Panasonic PT-DW530U

16
NETWORK menu (continued)
NETWORK PASSWORD
Use this if you want to restrict the connection by setting the password when connecting with the projector using the
“Wireless Manager mobile edition 5.5”.
Set to [ON] if you want to perform the password check when connecting to the network.
(Default : [OFF])
Select [NETWORK PASSWORD] at the network menu.
1
NETWORK
PROJECTOR NAME NAME1234
WIRED LAN
WIRELESS LAN
USER1
NETWORK CONTROL
NETWORK PASSWORD
OFF
NETWORK PASSWORD CHANGE
LIVE MODE CUT IN OFF
COMPUTER SEARCH
MULTI -LI VE
NETWORK STATUS
MENU SELECT
CHANGE
Select [ON] with the ◄► buttons.
2
Note
This setting is not used in the Logo Transfer Software and the Multi Projector Monitoring & Control Software.
NETWORK PASSWORD CHANGE
You can change the password for the network connection.
Select [NETWORK PASSWORD CHANGE] at the
1
network menu and press the <ENTER> button.
NETWORK
PROJECTOR NAME NAME1234
WIRED LAN
WIRELESS LAN
USER1
NETWORK CONTROL
NETWORK PASSWORD
ON
NETWORK PASSWORD CHANGE
LIVE MODE CUT IN OFF
COMPUTER SEARCH
MULTI -LI VE
NETWORK STATUS
ENTER
MENU SELECT
SUB MENU
Select characters with the ◄►▲▼ buttons and press
2
the <ENTER> button to enter the password.
You can delete the letter immediately before the cursor in the entry box
by selecting [BS].
After entering the password, select [OK] and press the
3
<ENTER> button.
Select [CANCEL] to undo the changes and then press the <ENTER>
button.
NETWORK PASSWORD CHANGE
Note
It is recommended to change password on a regular basis for keeping it private.