NETWORK menu (continued)
WIRELESS LAN
_
You can make detailed wireless LAN settings.
You can configure settings when the wireless module (ET-WM200E/ET-WM200U) is mounted. _
Setting network number
Select [WIRELESS LAN] with the ▲▼ buttons.
1
Select the number to be connected with the ◄► buttons.
2
NETWORK
PROJECTOR NAME NAME1234
WIRED LAN
WIRELESS LAN
S-MAP
NETWORK CONTROL
NETWORK PASSWORD
OFF
NETWORK PASSWORD CHANGE
LIVE MODE CUT IN OFF
COMPUTER SEARCH
MULTI -LI VE
NETWORK STATUS
MENU SELECT
CHANGE
Network number [OFF], [S-MAP], [1]-[4], [USER1]-[USER3] ・
Selecting [OFF] disables the wireless LAN. ・
Network number: [S-MAP] and [1]-[4] are available only when connecting via wireless LAN with the application ・
software the “Wireless Manager mobile edition 5.5”.
USER settings
You can congure more precise network settings, if you select from [USER1] to [USER3] (user) for
[WIRELESS LAN] in the network menu. For network settings, contact your network administrator.
Conguration of wireless LAN (USER) ■
Press ◄► to select [USER1] – [USER3], and press
1
<ENTER> button.
WIRELESS LAN
1/3
NAME CHANGE
USER1
DHCP
OFF
IP ADDRESS
192.168. 11.100
SUBNET MASK
255.255.255. 0
DEFAULT GATEWAY
192.168. 11. 1
NEXT CANCEL
MENU SELECT
ADJUST
To Next Page
Loading...
