Panasonic PT-DW530U

SECURITY menu
ENGLISH -
73
Settings
DISPLAY SETTING
You can set your original text, such as company
name or URL information, to display regularly on the
projected image while projecting.
Press ▲▼ to select [DISPLAY 1 )
SETTING].
Press ◄► to switch [DISPLAY 2 )
SETTING].
The setting will change as follows each time
z
◄► is pressed.
OFF TEXT LOGO1
OFF The text display is disabled.
TEXT The text display is enabled.
LOGO1
The picture registered by the user
will be projected.
Note
Separate software [Logo Transfer Software] is required in
z
order to create the pictures to use for [LOGO1]. Consult
your dealer.
TEXT CHANGE
You can enter your original text to be displayed when
[DISPLAY SETTING] is turned [TEXT].
Press ▲▼ to select [TEXT CHANGE].1 )
Press <ENTER> button.2 )
The [TEXT CHANGE] screen will be displayed.
z
Press ▲▼◄► to select characters 3 )
and press <ENTER> button to input
them.
Press ▲▼◄► to select [OK], and 4 )
press <ENTER> button.
The text is now changed.
z
MENU LOCK
You can lock <MENU> button function and the
password will be asked to display the menu every
time.
Press ▲▼ to select [MENU LOCK].1 )
Press ◄► to switch [MENU LOCK].2 )
The setting will change as follows each time
z
◄► is pressed.
OFF ON
OFF
Deactivate the [MENU LOCK]
system.
ON Activate the [MENU LOCK] system.
Note
Once [MENU LOCK] is set to [ON], you cannot use
z
<MENU> button unless you input the correct password.
The [MENU LOCK] is set to [OFF] by default and when
z
initialized.
The unlock state is maintained until the projector is set to
z
the standby mode.
MENU LOCK PASSWORD
You can change the password for [MENU LOCK]
system to your original.
Press ▲▼ to select [MENU LOCK 1 )
PASSWORD].
Press <ENTER> button.2 )
The [MENU LOCK PASSWORD] screen will be
z
displayed.
Press ▲▼◄► to select characters 3 )
and press <ENTER> button to input
them.
Press ▲▼◄► to select [OK], and 4 )
press <ENTER> button.
To stop, select [CANCEL].
z
Attention
The factory default password is “AAAA”.
z
When the projector is initialized, the password will be
z
changed to the factory default setting, “AAAA”.
Change the MENU LOCK PASSWORD regularly and
z
make it uneasy to guess.