Dimensions
106 - ENGLISH
Appendix
Dimensions
z
When installing the projector to a ceiling, be sure to use the specied ceiling mount bracket (ET-PKD56H: for
high ceilings, ET-PKD55S: for low ceilings).
z
When installing the projector, attach the drop-prevention kit supplied with the ceiling mount bracket to the
projector. When you wish to purchase the kit (Product No. TTRA0214), consult your dealer.
z
Installation work of the ceiling mount bracket should only be performed by a qualied technician.
z
Panasonic takes no responsibility for any damage to the projector resulting from use of a ceiling mount bracket
not manufactured by Panasonic or the inappropriate choice of location for installation, even if the warranty
period of the projector has not expired.
z
An unused ceiling mount bracket must be removed promptly by a qualied technician.
z
Use a torque driver or a hex torque driver when tightening the screws and tighten the screws within the
minimum required tightening torque. Do not use tools such as electric screwdrivers or impact screwdrivers.
z
For details, read the installation manual that comes with with the ceiling mount bracket.
z
The part numbers of accessories and separately sold components are subject to change without notice.
M6
Bottom view Model No. of ceiling mount bracket: ET-PKD56H (for high ceilings)
ET-PKD55S (for low ceilings)
Torque: 4 ± 0.5 N·m
12 mm
Ceiling mount bracket safeguards
<Unit: mm>
5 (3/16")
20 (25/32")
21 (13/16")
498 (19-19/32")
77.5 (3-1/16")
155 (6-3/32")
43 (1-11/16")
9 (11/32")
423 (16-21/32")
* The above dimension is for the models with the standard zoom lens.
* Actual dimension may differ depending on the product.
To Next Page
Loading...
