DIS-18
3. 4. Signal processing block
3. 5. Intake air duct
*DMD2 fan-R2 and Color prism fan-G7
lead wire is untack (take up the slack)
from inside of the Engine block case.
*DMD2 fan-R2 lead wire is outside of the signal processing block case.
*G7 lead wire is through the wall side
of the signal block case.
*That the FM power lead wire
and flexible cables do not overlap.
R2
G7
RL8
RL9
F3
F1
*Hook
・F1-RL8 lead wire
・F3-Intake1 fan lead wire
*Hook
・Air flow sensor-RL9 lead wire
*Hook
・F1-RL8 Lead wire
・Air flow sensor-RL9 lead wire
To Next Page
Loading...
