To Next PageTo Next PageWhy are the buttons on the control panel of my Panasonic Projector not operating?
If the buttons on the control panel of your Panasonic Projector are not operating: * Check if the [CONTROL PANEL] setting in [CONTROL DEVICE SETUP] is set to [DISABLE]. * Verify if the terminal is used for contact control.
What to do if DIGITAL LINK input image or sound is not output from my Panasonic PT-EW650?
If the DIGITAL LINK input image or sound is not output from your Panasonic Projector: * Ensure that the connections between the twisted-pair-cable transmitter and the projector or an external device are correctly done. * Verify that [DIGITAL LINK MODE] is set to [AUTO], [DIGITAL LINK] or [LONG REACH]. * Check if a signal which is not compatible with a twisted-pair-cable transmitter is being input.
How to fix a Panasonic PT-EW650 Projector when the power does not turn on?
If your Panasonic Projector isn't turning on, check these possible causes: * Ensure the power plug is firmly inserted into the outlet. * Verify that the switch is not set to . * Confirm that the wall outlet is supplying electricity. * Check if the circuit breakers have tripped. * See if the lamp indicator or the temperature indicator is lit or blinking. * Make sure the lamp cover is securely attached.
Why does the color appear pale or grayish on my Panasonic PT-EW650 Projector?
If the color on your Panasonic Projector appears pale or grayish: * Check if [COLOR] or [TINT] is adjusted correctly. * Ensure the external device connected to the projector is adjusted correctly. * Verify that the RGB cable is not damaged.
What to do if video from an HDMI device doesn't appear correctly on my Panasonic Projector?
If video from an HDMI compatible device does not appear or appears jumbled on your Panasonic Projector: * Ensure the HDMI cable is connected securely. * Try turning off and on the power of both the projector and the external device. * Verify that the input signal is compatible with the projector.
Why is there no audio output from my Panasonic Projector?
If there is no audio output from your Panasonic Projector, consider the following: * Check if the external device is connected correctly to the audio input terminal. * Ensure that [MUTE] in [AUDIO SETTING] is not set to [ON]. * Verify that the audio input selection in [AUDIO SETTING] is set correctly.
How to fix a fuzzy image on a Panasonic PT-EW650 Projector?
If the image on your Panasonic Projector is fuzzy, try these solutions: * Ensure the lens focus is set correctly. * Verify that the projection distance is appropriate. * Check if the lens is dirty. * Confirm that the projector is installed perpendicular to the screen.
How to display computer image on Panasonic PT-EW650 Projector?
If the image from a computer does not appear on your Panasonic Projector, check if the cable is too long (for D-Sub cables, it should be 10 m (32'10") or shorter). Also, verify that the external video output on the laptop computer is set correctly. The external output settings may be switched by pressing the “Fn” + “F3” or “Fn” + “F10” simultaneously, but refer to your computer's user manual as the method varies.
Why Panasonic PT-EW650 Projector remote control does not respond?
If your Panasonic Projector's remote control isn't responding, check if the batteries are depleted and ensure their polarity is correct. Make sure there are no obstructions between the remote and the projector's receiver and that you're within the remote's effective range. Also, verify if other light sources, like fluorescent lights, are interfering with the signal. Check if the [REMOTE CONTROLLER] setting in [CONTROL DEVICE SETUP] is set to [DISABLE], ensure the ID number setting is correct, and verify if the terminal is used for contact control or if the cable connected to the terminal is connected to the remote control wired terminal.
What to do if menu screen does not appear on my Panasonic PT-EW650?
If the menu screen does not appear on your Panasonic Projector, ensure that the on-screen display function is not turned off (hidden).
General| Native aspect ratio | 16:10 |
|---|---|
| Projection distance | - m |
| Vertical scan range | 24 - 120 Hz |
| Horizontal scan range | 15 - 91 kHz |
| Projection technology | 3LCD |
| Contrast ratio (typical) | 10000:1 |
| Screen size compatibility | 40 - 400 \ |
| Projector native resolution | WXGA (1280x800) |
| Keystone correction, vertical | -30 -30 ° |
| Keystone correction, horizontal | -25 - 25 ° |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 461 W |
| Focal length range | 17.1 - 31.7 mm |
| Aperture range (F-F) | 1.6 - 2.2 |
| Lamp power | 320 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 4000 h |
| Service life of light source (economic mode) | 5000 h |
| HDCP | Yes |
| Noise level | 35 dB |
| Noise level (economic mode) | 29 dB |
| Dot clock scanning frequency | 162 MHz |
| RMS rated power | 10 W |
| Number of built-in speakers | 1 |
| Placement | Desktop, Ceiling |
| Product type | Standard throw projector |
| Product color | White |
| Cable lock slot type | Kensington |
| Built-in display | No |
| Card reader integrated | - |
| Operating temperature (T-T) | 0 - 45 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Ethernet LAN (RJ-45) ports | 2 |
| Composite video in | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| VGA (D-Sub) ports quantity | 3 |
Weight and Dimensions| Depth | 398.3 mm |
|---|---|
| Width | 498 mm |
| Height | 145.7 mm |
| Weight | 9000 g |
