Chapter 4
Settings — [DISPLAY OPTION] menu
ENGLISH - 81
11) Press qw to select [OK], and press the <ENTER> button.
Note
f
The setting details are displayed in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] below [EDID MODE].
f
The resolution and vertical scanning frequency settings may be required on your computer or video device.
f
After conguring settings, your computer or video device or the projector may be required to be restarted.
f
Output with resolution and vertical scanning frequency that have been set may not be performed depending on your computer or video
device.
[CLOSED CAPTION SETTING]
(Only for NTSC, 480i YC
B
C
R
input)
Set the closed caption.
Selecting the closed caption display
1) Press as to select [CLOSED CAPTION SETTING].
2) Press the <ENTER> button.
f
The [CLOSED CAPTION SETTING] screen is displayed.
3) Press as to select [CLOSED CAPTION].
4) Press qw to switch the item.
f
The items will switch each time you press the button.
[OFF] Closed captions are not displayed.
[ON] Closed captions are displayed.
f
When [ON] is selected, proceed to Step 5).
5) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Setting the closed caption mode
1) Press as to select [CLOSED CAPTION SETTING].
2) Press the <ENTER> button.
f
The [CLOSED CAPTION SETTING] screen is displayed.
3) Press as to select [MODE].
f
When [CLOSED CAPTION] is set to [OFF], [MODE] cannot be selected.
4) Press qw to switch the item.
f
The items will switch each time you press the button.
[CC1] Displays CC1 data.
[CC2] Displays CC2 data.
[CC3] Displays CC3 data.
[CC4] Displays CC4 data.
Note
f
Closed caption is a function that displays text information of video signals mainly used in North America. Captions may not be displayed
depending on the connected devices or contents being played back.
f
[CLOSED CAPTION SETTING] can only be selected if an NTSC or 480i YC
B
C
R
signal is input.
f
If [CLOSED CAPTION] is set to [ON], the brightness of image may be changed according to the external devices or the used content of the
closed caption corresponding connection.
f
If a closed caption signal of the selected mode is input, the security message set in the [SECURITY] menu → [DISPLAY SETTING] (
Æ
page
98) is not displayed.
f
Closed captions are not displayed when the menu screen is displayed.
[SCREEN SETTING]
Set the screen size.
Correct to the optimum image position for the set screen when changing the aspect ratio of a projected image. Set
as necessary for the screen in use.
1) Press as to select [SCREEN SETTING].
To Next Page
Loading...
