Panasonic PT-FX500

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 93
Setting the mute
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f
The [AUDIO SETTING] screen is displayed.
3) Press as to select [MUTE].
4) Press qw to switch the item.
f
The items will switch each time you press the button.
[OFF] Audio is output.
[ON] Audio is not output.
Setting audio input selection
Choose the audio input terminal for each input signal.
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f
The [AUDIO SETTING] screen is displayed.
3) Press as to select one item of [AUDIO IN SELECT].
[COMPUTER1] Set the audio output when [COMPUTER1] input is selected.
[COMPUTER2] Set the audio output when [COMPUTER2] input is selected.
[VIDEO] Set the audio output when [VIDEO] input is selected.
[HDMI1] Set the audio output when [HDMI1] input is selected.
[HDMI2] Set the audio output when [HDMI2] input is selected.
[DIGITAL LINK] Set the audio output when [DIGITAL LINK] input is selected.
[NETWORK] Set the audio output when [NETWORK] input is selected.
4) Press qw to switch the item.
f
The sub items will switch each time you press the button.
[COMPUTER1] Select one item among [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
[COMPUTER2] Select one item among [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
[VIDEO] Select one item among [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
[HDMI1] Select one item among [HDMI1 AUDIO IN], [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
[HDMI2] Select one item among [HDMI2 AUDIO IN], [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
[DIGITAL LINK] Select one item among [DIGITAL LINK AUDIO IN], [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
[NETWORK] Select one item among [NETWORK AUDIO IN], [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
[TEST PATTERN]
Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reected in test patterns. Make sure to display the input
signal before performing various adjustments.
1) Press as to select [TEST PATTERN].
2) Press the <ENTER> button.
f
The test pattern with the [PATTERN CHANGE] individual adjustment screen is displayed.
3) Press qw to switch the test pattern.
f
The test pattern will switch each time you press the button.
f
When you press the <MENU> button or the <RETURN> button, it will exit the test pattern and return to the
sub menu of [PROJECTOR SETUP].