Chapter 5 Operations — Content Manager
192 - ENGLISH
1) Click in the “Slideshow”.
f The mode changes to deletion mode.
2) Select the content to delete.
f You can select multiple contents.
3) Click the [Delete] button.
4) When the confirmation screen is displayed, click the [OK] button.
5) Click the [Save] button.
f The edited slideshow setting is registered in the SD card.
Changing the still image content setting
Change the setting of still image contents registered in a slideshow.
Slideshow
1) Click the still image content registered in the “Slideshow”.
f The setting screen is displayed.
2) Change [Effect] and [Duration], and click the [Enter] button.
f Change the image effect and playback time settings.
3) Click the [Save] button.
f The edited slideshow setting is registered in the SD card.
To Next Page
Loading...
